Tag Archives: tutorial

Painting Miniatures By Stages – A Method — Heresy

I thought I’d show you the stages method that I’m using to paint my Blood Bowl team.

via Painting Miniatures By Stages – A Method — Heresy

Advertisements

Tutorial: Custom made Dice Tray

Here’s a neat idea! Never thought of making a dice tray before, but they definitely come in handy!

mindmazingblog

You want a nice looking but cheap dice tray fitting your army or board game? Here you are:

What you need:

  • a picture frame with a 2cm border (about 1 inch), size 19cm x 23,5 cm or smaller [5 Euro)
  • a custom printed mousepad, you get it in nearly every printshop [9 Euro]
  • wood glue or super glue
  • a knife
  • a ruler
  • black primer

Backside

Remove the stand on the backside of the frame.

Inside

Remove the glas on the inside

InlayBlack

I primed the mdf on both sides black.

DiceTray

And finally cut the Mousepad to a fitting size and glue it into the inside of the frame 🙂

Done!

View original post

Tutorial – White Marble

Fantastic tutorial here on how to paint Marble! Great idea for bases!

Rusty's Workshop

Polux4Hey all

I had a request to show how I did the marble on Alexis Polux’s shield, so I threw together a quick little tutorial. Hope you like!

I started off by undercoating the shield (and the rest of the model) chaos black I started off by undercoating the shield (and the rest of the model) chaos black

The next step was to airbrush Tamiya Flat White over the shield. This is done holding the airbrush from about a 45 degree angle above the shield, using the angle to keep the chaos black in the recesses to maintain the shadows The next step was to airbrush Tamiya Flat White over the shield. This is done holding the airbrush from about a 45 degree angle above the shield, angling the spray downwards. This should keep the chaos black in the recesses to maintain the shadows

Next, lines were painted across the shield using Nuln Oil. More thinned down Flat White was then airbrushed gently across the shield, dulling down the lines. Next, lines were painted across the shield using Nuln Oil. More thinned down Flat White was then airbrushed gently across the shield, dulling down the lines. As before, the airbrush was held at an angle to the shield to maintain the darker colors in the recesses.

Fresh lines were again applied using Nuln Oil, some over the original lines and some in fresh places across the shield. Again this was dulled down using the thinned down Flat White. This process was repeated several times, in order to add a feeling of depth to the marble. Fresh lines were again applied using Nuln Oil, some over the original lines and some in fresh…

View original post 227 more words

One Way at Orange – Or How to Paint Orange

A great tutorial on how to paint Orange!

Bleached Models - A Hobby Blog

Here I am going to explain how I paint my orange/brown used on my Aleph miniatures from Corvus Belli’s Infinity range.

What you will need are:

-Awesome Miniature (Yes, it has to be awesome!)
-Paint Brush
-Paints (in this case: German Grey [Vallejo Model Color], Gorthor Brown [Games Workshop], Orange Brown [Vallejo Model Color] and Scrofulous Brown [Vallejo Game Color]

1) Base Coat

Orange 01

Apply the base coat to the areas of the model you wish to paint with Gorthor Brown. Do not fret on being messy (at least as long as this is one of the first colors you are applying…).

2) First Shade

Orange 02

Start painting the darkest regions on your brown parts of the model. I try to focus on lower parts or sections where light is minimal or near non existent. It is not an exact science (doesn’t mean it cannot be), but it gets the job done…

View original post 490 more words

Hobby Tutorial: Quick and Cheap Homemade Wet Palette

I’ve been using a wet palette for a few years and I recommend them to anyone looking to get great results on their miniatures! Thin paints are key!

Guslado's Games

Wet Palette 06

When I started taking miniature painting seriously, I asked the good painters I saw what their number one recommendation is for someone to improve their painting. Invariably they said, “Thin your paints!” This is because not only does this make the paints go on smoother than if you used them straight from the pot, it reduces the appearance of brush strokes, and most importantly it takes advantage of the translucent quality of the acrylic paints we use as miniature painters; briefly what this means is that if you properly thin your paint the layer beneath your top layer will show through some where the top layer is thinner, giving you a smother blending of layers.

The addition of that simple technique to my painting arsenal stepped up my painting game immensely, but the one issue I ran into with working with thinned paints is that, like all paints, they gradually…

View original post 1,079 more words

Hobby Tutorial: How to Make a (nearly) Free Photo Studio for Your Painted Miniatures!

You painted those models up super nice, make sure they have the pictures to show them off! (yes, I’m guilty of the grainy phone picture myself…)

Guslado's Games

Photo Box 14

I have been working on improving the quality of photos I take of my miniatures for a while and have found a great method used by “the pros” that most any hobbyist can pull off at home for a nearly no cost at all. That method is using a photography light diffusion box and I am going to teach you how to build one using items you probably have around your house (and if you don’t, they are rather inexpensive to procure).

View original post 1,617 more words

Holy Rusted Metal!

Great tutorial for rusted metal bases!

osographic

Metal is hard to maintain. It get’s gritty, looses it’s luster, accumulates rust and eventually falls apart but that’s why we love it. It grows character with age. In this post I’ll cover my technique for painting my favorite of all metals, the rusted kind. Come sit, and paint with me.

Rust1Firstly, I designed these 55mm bases for use on some of my Infinity models. By using sheets of platicard, corrugated cardboard, aluminum wire, and even a BIC pen, I was able to create an industrial look. I highly recommend trying this project out to any hobbyist. Just go nuts and have fun.

Rust2Once the bases were built I spray painted them using Army Painter’s Platemail Metal. It’s not the best surface to paint on being that it’s so glossy, so I also sprayed a coat of clear matte varnish over it.

Rust3Next is a heavy wash of P3’s Battledress Green. I like to mix in a little bit…

View original post 172 more words